PO-881 Reverse Osmosis Bactericide

Products Show


  • PO-881 Reverse Osmosis Bactericide

PO-881 Reverse Osmosis Bactericide

Category:RO Chemicals

Back to list
  • Product Description
  • Product Performance

    PO-881 is a non-oxidizing bactericide. Featuring high efficiency, broad spectrum and environmental friendliness, it is recognized as an ideal bactericidal, algicidal and slime stripping inhibitor for membrane applications. It can reduce the frequency of reverse osmosis chemical cleaning and prolong the service life of reverse osmosis membrane elements.

    Technical Specifications

    Item

    Specification

    Appearance

    Colorless to light green transparent liquid

    Hazard

    Slightly irritating

    pH Value

    3.0–6.0

    Density (20℃), g/cm³

    1.02±0.02

    Application Method

    To achieve optimal bactericidal effect, the bactericide shall be added before the cartridge filter. Apply it once a week with a treatment duration of 30–45 minutes. It can be dosed at 4–8 ppm for online continuous dosing, or 100–400 ppm for online intermittent dosing. The specific dosage shall be determined according to water quality conditions and seasonal changes.

    When the RO system is shut down, prepare the bactericidal solution by means of chemical cleaning and circulate the solution for system treatment. If the system is heavily contaminated, perform chemical cleaning first and then carry out sterilization treatment. Our technical service personnel will determine the dosing point and dosage according to the specific conditions of your system.

    Packaging, Storage, Transportation and Precautions

    Packed in plastic drums, with specifications of 25kg/drum, 200kg/drum or customized as per customer requirements. Store in a cool and dry place with a shelf life of 12 months. Pay attention to labor protection during operation; avoid direct contact with skin, eyes and other mucous membranes. In case of contact, rinse the affected area thoroughly with plenty of clean water.

    Bactericidal Efficacy Table

    Microorganism Species

    Colony Count (cfu/ml)

    Minimum Dosing Concentration (ppm)

    Microorganism Species

    Colony Count (cfu/ml)

    Minimum Dosing Concentration (ppm)

    Brevibacterium ammoniagenes

    6500

    2

    Salmonella

    1000

    9

    Achromobacter parvulus

    4000

    2

    Proteus vulgaris

    8500

    5

    Alcaligenes faecalis

    8500

    2

    Pseudomonas aeruginosa

    15000

    5

    Enterobacter aerogenes

    3500

    5

    Aspergillus niger

    9500

    9

    Escherichia coli

    11000

    5

    Aspergillus oryzae

    10000

    5